10 ms transfer
When the grid drops, the load moves to the battery faster than a computer can notice. The boiler and the fridge keep running.
Home energy system · all in one
Hybrid inverter, MPPT controller and LiFePO4 storage — one system for outage backup, solar panels and a generator. Capacity grows with your needs.
LA5548JMH
5.5 kW
5.1 kWh storage · 11 kW peak
LA11048JMH
11 kW
11.8 kWh storage · 22 kW peak
Why all in one
The inverter, solar controller and battery are matched at the factory: nothing to pick, check for compatibility or install separately.
When the grid drops, the load moves to the battery faster than a computer can notice. The boiler and the fridge keep running.
Powers any appliance — from the fridge and boiler to heating controls and computers — with no hum or overheating.
MPPT 90–500 V for the panels, 90–280 V input for the grid. During a long outage the battery can be charged from a generator.
Solar, grid or battery — you choose which source goes first. Save on the night-time rate.
More than 10 years of daily cycling at 25 °C. A BMS and a circuit breaker in every module.
Protection and modes live in the station itself. The app shows and configures, but the home stays powered offline.
How it works
The system keeps balancing generation, storage and consumption, and you choose the scenario.
Solar
up to 5.5 / 11 kW PV
Grid or generator
230 V · 90–280 V
Inverter + MPPT
pure sine · up to 94 % efficiency
LiFePO4 storage
5.1 → 11.8 kWh → more
Home
all loads, 230 V
In daytime the home runs on the panels, the surplus goes to the battery; the grid is only a backup.
The battery is kept for outages: a classic UPS with solar top-up.
Maximum autonomy: charge from solar or at the night rate, use it during the day.
Surplus solar can be exported to the grid under a microgeneration agreement with the utility.
Expandability
Storage capacity is not fixed. 51.2 V battery modules connect in parallel to a running system — no inverter swap, no panel rework, no downtime.


51.2 V LiFePO4 batteries with their own BMS go in parallel; the inverter sees the total capacity.
Expand on site: the inverter and the panel stay, you enter the new capacity in the settings.
Modules add hours on battery. Need more kilowatts — choose LA11048JMH.
Layout options any combination of inverter and battery modules
LA5548JMH · 100 Ah module
5.12 kWh per module
How long a typical 1 kW home load runs (fridge, boiler, lights, router):
LA11048JMH · 230 Ah module
11.78 kWh per module
The same 1 kW load — a day and more in reserve:
Estimate at the given average load, discharged to the lower BMS limit, without solar charging. The maximum number of parallel modules and the expansion layout are confirmed when sizing the system.
Specifications
| Parameter | LA5548JMH | LA11048JMH |
|---|---|---|
| Inverter | ||
| Rated power | 5.5 kW | 11 kW |
| Peak power | 11 kW | 22 kW |
| Output voltage / waveform | 230 V ±5 % · pure sine | 230 V ±5 % · pure sine |
| Efficiency (max) | 94 % | 94 % |
| Transfer time | 10 ms (PC) / 30 ms (appliances) | 10 ms (PC) / 30 ms (appliances) |
| Self-consumption | < 55 W | < 80 W |
| Grid input | 170–280 V (UPS) · 90–280 V (inv.) | 170–280 V (UPS) · 90–280 V (inv.) |
| Frequency in / out | 50/60 Hz auto · output ±0.1 % | 50/60 Hz auto · output ±0.1 % |
| Solar input and charging | ||
| Controller type | MPPT | MPPT × 2 |
| Max PV power | 5,500 W | 2 × 5,500 W |
| MPPT range | 90–500 V DC | 90–500 V DC |
| Max charge current PV / grid | 100 A / 80 A | 150 A / 120 A |
| Max total charge current | 100 A | 150 A |
| Storage (base module) | ||
| Chemistry / voltage | LiFePO4 · 51.2 V | LiFePO4 · 51.2 V |
| Module capacity | 100 Ah · 5,120 Wh | 230 Ah · 11,776 Wh |
| Cycle life | up to 10,000 cycles at 25 °C | up to 10,000 cycles at 25 °C |
| Charge / cut-off voltage | 56 V / 42 V | 56 V / 42 V |
| Discharge current: cont. / peak (1 min) | 100 A / 120 A | 200 A / 230 A |
| Charge current: rec. / max | 50 A (0.5C) / 100 A | 115 A (0.5C) / 200 A |
| Protection | BMS + circuit breaker | BMS + circuit breaker |
| Capacity expansion | parallel 100 Ah modules | parallel 230 Ah modules |
| Dimensions and weight | ||
| Inverter | 550×170×450 mm · 13 kg | 650×260×470 mm · 15 kg |
| Battery module | 550×170×450 mm · 55 kg | 650×260×560 mm · 110 kg |
LA5548JMH One form factor — modules stack on top of each other.
LA11048JMH Two MPPT inputs — for two roof orientations.
Specifications are subject to change by the manufacturer.
Brix app
Battery charge, generation and consumption in real time. Switch modes and the backup reserve from the app, and learn about a grid outage before you notice it yourself.
Where every kilowatt goes right now: solar, home, battery, grid.
A push notification when the home switches to battery, with an estimate of how long it lasts.
Backup, self-consumption or schedule; how much charge to keep for an outage.
Generation, consumption and balance by day, week and month.
QR code on the station, Bluetooth and Wi-Fi — no technician needed for setup.
Shared access to the home: everyone sees the station on their own phone.
The web version runs in a browser on your phone and computer.
Grid down · running on battery
78%
≈ 14 h at the current load
Sizing
Power, capacity and the number of expansion modules — calculated free of charge from your consumption profile.
Already have a station? Sign in to the app